How To Do Polygel Nails
Jump To:
When you are looking to do gel nails at home, you need to make sure that the quality is good. This will ensure that the nails last for a long time and stand out from the others. Here is a beginner’s guide to knowing how to do polygel nails along with some tips and tricks.
How to do polygel nails at home | How to do polygel nails with dual forms
- Prepare your nails by filing them.
- This helps smooth any jagged edges, giving you a nice surface that will last longer.
- Select the dual or nail forms that are appropriate for your fingers. This is an optional step, as the polygel may be applied directly to natural nails.
- If you want to utilize a dual form, your kit will most likely include a variety of sizes.
- Apply your base coat and set it under an LED light to cure it.
- The amount of time you spend under the light may vary depending on your equipment, but 60 seconds is a decent rule of thumb.
- Dip your brush in the slip/alcohol-based solution provided.
- Apply polygel to the dual shape or the nail.
- Spread the polygel evenly on the dual form with your brush and mold it into the appropriate shape.
- Press the polygel covered double form onto your nail to apply a dual form.
- To set the polygel, place your nails under the LED light for a few minutes
- If you’re employing a dual form, get rid of it.
- Cut, file, and shape your nails to get the aesthetic you want.
- Apply the topcoat and cure your nails one more time under the LED light.
Is Polygel nails hard to do?
Polygel is far harder and more durable than regular gel but more flexible and easier to work with than traditional acrylic, making it the ideal option for crafting salon-style nails at home.
What all do I need to do Polygel nails?
You will need the Polygel solution, a metal tool to apply it, a precision brush to smooth it, and a slip solution to prevent the Polygel from sticking to your nail tools. The solution also needs to harden using an LED or UV lamp, and you should apply a finishing coat.
Can you use hand sanitizer as slip solution for Polygel?
Hand Sanitizers shouldn’t be used as a slip solution. This is because most brands of hand sanitizers usually contain a wide array of additives. And these additives such as oils and gel can drastically change the chemical composition of your Polygel which might interfere with the curing process.
Can you use Polygel without basecoat?
Polygel is no different (in fact, any product should require a solid foundation). Follow these 6 steps and you will not go far wrong: File and shape your natural nail art canvas.
Why do my PolyGel nails pop off?
Polygel nails aren’t supposed to fall off without filing. If your poly gel nail is popping from the back, then it’s due to the lack of nail prep or improper application. Make sure your nails are free of water and oil. However, it’s possible that you simply have super soft nails.
Can you use PolyGel as glue for press on nails?
How do you apply PolyGel without UV light?
Thankfully, there are alternative ways to cure gel polish with less UV exposure. While only an LED lamp can cure your polish as quickly and effectively as a UV light, using a non-UV gel polish, applying a drying agent, or soaking your nails in ice water could work as well.
Is Polygel or acrylic better for beginners?
“It has the strength of acrylic, but is lighter, stronger, and [more] flexible,” says Lim. Because of this, Polygel nails are less likely to break off. Plus, as Lim points out, Polygel is easier to apply—it doesn’t require the tedious mixing of powder.
Does Polygel break easily?
So never apply them too thick. When the layer is super thick LED-light can not go through the product and it will stay soft in the middle. Such a nail can easily break. If you want to make long nails with a white free edge split the process into 2-3 steps.
Can u paint over Polygel nails?
You can absolutely use either gel or traditional polish over top of PolyGel. If you want the flexibility of making regular colour changes, opt for traditional polish. After your PolyGel application, apply a layer of Top it Off Top Coat BEFORE applying two coats of your favourite nail polish.
How long does it take PolyGel to dry?
Unlike hard gel, PolyGel is not self-leveling, but stays where you place it; unlike acrylic, it doesn’t harden until it’s cured in an LED or UV lamp. Cure time is about 30 seconds in an LED lamp or two minutes in a UV lamp. PolyGel nails do not experience heat spikes during curing.
Can you put PolyGel over tips?
Can you do Polygel nails without slip solution?
You do need a slip solution or 70% alcohol to work with the gel. Great starter pack. This photo was taken two weeks after I applied the polygel nails. You need to utilize a nail dehydrator or rubbing alcohol at 70% or more in place of a dehydrator.
What can I use instead of slip solution for Polygel?
rubbing alcohol You can use base gel as well since the chemical components are similar to that of the poly gel, but the best substitute for slip solution is pure rubbing alcohol with a concentration of 70% or greater. Rubbing alcohol is the main ingredient in slip solution so this is the best alternative to use in a pinch.
Can I use hydrogen peroxide as slip solution?
Both 99-percent isopropyl alcohol and hydrogen peroxide are good substitutes for nail polish remover. Just soak your nails in warm water, dab a cottonball with either the alcohol or the peroxide and apply to your nails.
Do you need a dehydrator for Polygel nails?
Answer: You won’t need to sure any of these, only your gel polishes. To use you will apply the dehydrator which is in the clear bottle with the blue label. … After u apply the primer you will then apply your base gel polish and cure then your color gel then cure, then ur top coat gel then cure.
Do you need dehydrator and primer for Polygel nails?
You should always have a primer. Primer is an important step in completing a proper set of acrylic nails. You don’t need both a bonder and a dehydrator, but you definitely need one. We definitely recommend PH Plus over dehydrator because it promotes adhesion a better than Dehydrators.
Can I use topcoat as a base coat?
Also, topcoat as a basecoat doesn’t work because it’s thicker, it takes longer to dry, and it doesn’t have the properties that a basecoat does to properly lock out the oils in your natural nails.
How thick should Polygel be?
What is Lazy Girl Method nails?
The word “lazy” refers to little filing in this method. The main difference between these two methods is instead of using dual form, lazy girl method uses regular false nail tips as the container of polygel and not taking them off after curing. What’s more, it will add more strength with both polygel and nail tips.
How do you apply full nail Polygel?
How do you glue Polygel?
Can you put fake nails under a gel lamp?
The short answer is yes you can. However, it is said that the UV light penetrates and cures better with the clear tips. I personally do not use tips, I prefer sculpting. However, during training, our trainer insisted on using clear tips.
Can I put Polygel over acrylic?
Can you put polygel over acrylic? You can, and many will, but some professionals prefer a clean canvas to work with. If you put polygel over acrylic, you should be fine as long as you file to balance the look. Polygel doesn’t harden until it’s curated under a UV or LED light.
Are Polygel nail forms reusable?
Yes. The poly gel comes off the form completely when cured. And even if there are bits that stick to the form, you can still reuse it, because you have to file your nails with the gel anyways (so doesn’t need to be applied smooth and perfect). Yes, you are able to reuse the dual forms.
Why is Polygel so sticky?
The sticky residue that is left on the nail after curing is caused from the oxygen in the air near the upper layer of gel that doesn’t let the oligomers link together to cure properly which results in that sticky layer of uncured gel. It’s just a matter of oxygen. For example, when you apply ONE layer of gel, cure it.
What base coat do you use for Polygel?
1) Push your cuticles back, file, buff, and cleanse your nails with Mylee Nail Prep & Polish Wipe. 2) Apply a thin coat of Mygel Base Coat and cure for 1 minute under a LED lamp or 2 minutes under a UV lamp. 4) Roll the polygel onto the nail.
What wattage LED lamp do I need for Polygel nails?
36W You need to buy one UV lamp or LED lamp because this product excluded lamps. Recommend the wattage 36W or 48W. The more the watts the lesser time curing.
How long do you leave Polygel under UV light?
After the Polygel is in place, your nail technician will have you place your nails under an LED or UV lamp for about 30 seconds. Depending on the style you’re hoping to achieve, your nail tech can repeat the previous two steps to apply another color to your nail, such as a white tip.
